Comments Hatz Diesel Generator Sets The Range Single phase models from 2.7 to 32 kVA. Lightweight 2 pole (3000 rpm) models. Three Phase models from 3.5 to 34 kVA Heavy duty 4 pole (1500 rpm) models "Silent Pack" low noise models from 3.2 to 30 kVA Standard Generator Set build Specifications All AC Generators comply with AS1359 or its ISO, IEC or BSS equivalents All Hatz Gensets comply with AS1501 (AS2789) limits for cyclic irregulatiry. One and two cylinder 4 pole models include heavy fly wheel All Hatz engines are heavy duty direct injection air cooled diesels designed and manufactured in Germany.They are not light duty automative derivative type. All AC wiring (where supplied) comply with AS 300, AS3100 or AS2790 as applicable All Hatz Gensets are rated for ISO standard conditions of 27 degrees Celcius and 100m. Derating to ISO, AS or DIN standards applies tohighter ambient conditions and altitudes - details on application. 2 pole "Lightweight and low vibration" (3000 rpm) models are MCR rated to ISO 3046-IFN. 2 pole "Silent Pack: and all 4 pole models are rated continuous to ISO3046-ICFN and are capable of 10% overload for 1 hours in every 12. "Silent Pack models have noise levels of under 74 dB(A) on 2 pole range and under 69 dB(A) on 4 pole range. "Silent Pack" models have counter rotating balance shafts to give extremely low levels of vibration. All models include. One or two bearing flange mounted generator. Residential exhaust silencer and safety guards. Air cleaner and fuel filter. All electric start models (except 1B20/30) include stop solenoid and shutdown protection All 1 & 2 cylinder 4 pole models include heavy flywheels 2 pole single phase models (3000 rpm) up to 5 kVA include power outlets and earth leakage protection. Not included. Switchgear and overload/overcurrent protection battery on electric start models (Leads and carrier included).