HATZ HEAVY DUTY AIR-COOLED DIESEL GENERATOR SETS

The Range 

• Single Phase models from 2.7 to 32 kVA
• Lightweight 2 pole (3000 rpm) models
• Three Phase models from 3.5 to 34 kVA
• Heavy duty 4 pole (1500 rpm) models
• "Silent Pack" low noise models from 3.2 to 30 kVA

Standard Generator Set build Specifications

• All AC Generators comply with AS 1359 or its ISO, IEC or BSS equivalents. 
• All HATZ Gensets comply with AS1 501 (AS2789) limits for cyclic irregularity. One and two cylinder 4 pole models include heavy flywheel.
• All HATZ Engines are heavy duty direct injection air cooled diesels designed and manufactured in Germany. They are not light duty automotive derivative type.
• All AC wiring (where supplied) comply with AS3000, AS31 00 or AS 2790 as applicable.
• All HATZ Gensets are rated for ISO standard conditions of 27`C and 1 00m. Derating to ISO, AS or DIN standards applies to higher ambient conditions and altitudes - details on application.
• 2 pole "Lightweight and Low Vibration" (3000 rpm) models are MCR rated to ISO3046-IFN
• 2 pole "Silent Pack" and all 4 pole models are rated continuous to IS03046-ICFN and are capable of 10% overload for 1 hour in every 12.
• "Silent Pack" models have noise levels of under 74 dB(A) on 2 pole range and under 69 dB(A) on 4 pole range.
• "Silent Pack" models have counter rotating balance shafts to give extremely low levels of vibration.
• All models include... 
• One or two bearing flange mounted generator 
• Residential exhaust silencer and safety guards 
• Air cleaner and fuel filter 
• All electric start models (except 1 B20/30) include stop solenoid and shutdown protection. 
• All 1 & 2 cylinder 4 pole models include heavy flywheels.
• 2 pole models (3000 rpm) up to 9 kVA include engine mounted fuel tank (except Silent Packs).
• 2 pole single phase models (3000 rpm) up to 5 kVA include power outlets and earth leakage protection.
• Not included... 
• Switchgear and Overload/Overcurrent Protection 
• Battery on electric start models (leads and carrier included)
  

Bore Pump Generator Set Specifications

• Identical to Standard Build Specifications except:
• Fitted with oversize alternators to handle the high motor starting load.
• Compound type voltage regulator to minimise voltage dip on starting.

Hatz... a lifetime of quality and support

• Hatz Australia certified to IS09002 Quality Assurance (Lloyds Register QA)
• Hatz diesel engines are built to ISO and AQAP quality standards
• Backed up by over 70 service dealers throughout Australia
• Hatz in Germany was established over 115 years ago and have built more than 1.8 million engines

Options

• 24V starting on all electric start models.
• Fuel tank base on all models.
• Autostart and PBRC on electric models
• Oversize alternators for travelling irrigators and motor starting applications.
• Gauges, hourmeter voltmeter, ammeter, frequency meter etc.
• 60 Hz Generator Sets - add 20 % to 50 Hz ratings - Refer HATZ.

THE HATZ MODEL RANGE

Air Cooled Diesel Generator Sets

Special features include...

• Auto Decompression (*H models)
• Manual Stop and Fault Indicators (1B*E)
• Stop Solenoid and Engine Protection (all others)

Air Cooled Diesel Generator Sets for Submersible Bore Pump Drives

Model	Rating		Voltage/Phase	Starting	FLC/LRC*
SUPRA "LOW VIBRATION" 2 POLE RANGE (3000 RPM) - RATING: CONTINUOUS +10%
1D41Z-G12HB	5.0 kVA /	4.0 kW	240V 1 Phase 50 Hz	HANDCRANK	18A / 63A
1D41Z-Gl2EB	5.0 kVA /	4.0 kW	240V 1 Phase 50 Hz	12V ELECTRIC	18A / 63A
1D41Z-G32HB	5.0 kVA /	4.0 kW	415V 3 Phase 50 Hz	HANDCRANK	6A / 22A
1D41Z-G32EB	5.0 kVA /	4.0 kW	415V 3 Phase 50 Hz	12V ELECTRIC	6A / 22A
1D60Z-G12HB	6.0 kVA /	4.8 kW	240V 1 Phase 50 Hz	HANDCRANK	21A / 83A
1D60Z-G12EB	6.0 kVA /	4.8 kW	240V 1 Phase 50 Hz	12V ELECTRIC	21A / 83A
1 D60Z-G321-IB	6.5 kVA /	5.2 kW	415V 3 Phase 50 Hz	HAN13CRANK	8A / 31A
1 D60Z-G32EB	6.5 kVA /	5.2 kW	415V 3 Phase 50 Hz	12V ELECTRIC	8A / 31A
1D81Z-G12HB	9.0 kVA /	7.2 kW	240V 1 Phase 50 Hz	HANDCRANK	32A / 135A
1 D81Z-Gl2EB	9.0 kVA /	7.2 kW	240V 1 Phase 50 Hz	12V ELECTRIC	32A / 135A
1D81Z-G32HB	9.5 kVA /	7.6 kW	415V 3 Phase 50 Hz	HAN13CRANK	12A / 44A
1 D81 Z-G32EB	9.5 kVA /	7.6 kW	415V 3 Phase 50 Hz	12V ELECTRIC	12A / 44A
HEAVY DUTY 4 POLE RANGE (1500 RPM) - RATING: CONTINUOUS + 10%
1D81Z-G14EB	4.5 kVA /	3.6 kW	240V 1 Phase 50 Hz	12V ELECTRIC	16A / 78A
1D81Z-G34EB	5.0 kVA /	4.0 kW	415V 3 Phase 50 Hz	12V ELECTRIC	6A / 26A
2G40-G14EB	6,0 kVA /	4.8 kW	240V 1 Phase 50 Hz	12V ELECTRIC	21A / 78A
2G40-G34EB	6.5 kVA /	5.2 kW	415V 3 Phase 50 Hz	12V ELECTRIC	8A / 33A
Z790-G14EB	8.5 kVA /	6.8 kW	240V 1 Phase 50 Hz	12V ELECTRIC	30A / 135A
Z790-G34EB	9.0 kVA /	7.2 kW	415V 1 Phase 50 Hz	12V ELECTRIC	11A / 52A
2M41-Gl4EB	15.0 kVA /	12.0 kW	240V 1 Phase 50 Hz	12V ELECTRIC	53A / 208A
2M41-G34EB	15.0 kVA /	12.0 kW	415V 3 Phase 50 Hz	12V ELECTRIC	19A / 70A
3M41-G34EB	25.0 kVA /	20.0 kW	415V 3 Phase 50 Hz	12V ELECTRIC	31A / 131A
4M41-G34EB	33.5 kVA /	26.8 kW	415V 3 Phase 50 Hz	12V ELECTRIC	41A / 167A

LRC = Maximum Bore Pump Motor Starting Current in Amps
FLC = Maximum Bore Pump Motor Full Load Current in Amps

Approximate dimensions and weights of Generator Sets

Model	Length	Width	Height	Weight
1B20-Gl2H	750.00	400.00	550.00	65.00
1B20-Gl2E	750.00	400.00	550.00	75.00
1B30-Gl2E	750.00	400.00	600.00	85.00
1B30-Gl2H	750.00	400.00	600.00	75.00
1D31S-Gl2E	1250.00	500.00	650.00	135.00
1D31S-G12H	1250.00	500.00	650.00	120.00
1D41Z-Gl2E	1250.00	500.00	650.00	160.00
1D41Z-Gl2H	1250.00	500.00	650.00	155.00
1D41Z-Gl2EB	1250.00	500.00	650.00	165.00
1D41Z-G 12HB	1250.00	500.00	650.00	160.00
1D41Z-G32E	1250.00	500.00	650.00	185.00
1D41 Z-G32EB	1250.00	500.00	650.00	190.00
1D41Z-G32HB	1250.00	500.00	650.00	180.00
1D60C-Gl2E	1250.00	550.00	750.00	215.00
1D60C-GUE	1250.00	550.00	750.00	245.00
1D60C-G32E	1250.00	550.00	750.00	240.00
1D60C-G34E	1250.00	550.00	750.00	245.00
1D60Z-Gl2E	1250.00	500.00	650.00	190.00
1D60Z-Gl2H	1250.00	500.00	650.00	180.00
1D60Z-Gl2EB	1250.00	500.00	650.00	230.00
1D60Z-Gl2H13	1250.00	500.00	650.00	220.00
1D60Z-Gl4E	1250.00	500.00	650.00	220.00
1D60Z-GWE	1250.00	500.00	650.00	215.00
1D60Z-G32H	1250.00	500.00	650.00	205.00
1D60Z-G32EB	1250.00	500.00	650.00	205.00
1D60Z-G32HB	1250.00	500.00	650.00	195.00
1D60Z-G34E	1250.00	500.00	650.00	220.00
1D81C-Gl2E	1250.00	550.00	750.00	265.00
1D81C-G14E	1250.00	550.00	750.00	280,00
1D81C-G32E	1250.00	550.00	750.00	255.00
1D81C-G34E	1250.00	550.00	750.00	270.00
1D81Z-G12E	1250.00	500.00	650.00	245.00
1D81Z-Gl2EB	1250.00	500.00	650.00	305.00
1D81Z-Gl2H	1250.00	500.00	650.00	230.00
1D81Z-Gl2HB	1250.00	500.00	650.00	295.00
1D81Z-Gl4E	1250.00	500.00	650.00	255.00
Model	Length	Width	Height	Weight
1D81Z-Gl41EB	1250.00	500.00	650.00	245.00
1 D81 Z-G32H	1250.00	500.00	650.00	220.00
1D81Z-G32HB	1250.00	500.00	650.00	245.00
1D81Z-G32E	1250.00	500.00	650.00	235.00
1D81Z-G34EB	1250.00	500.00	650.00	235.00
2G40-Gl4E	1350.00	650.00	650.00	305.00
2G40-GAEB	1350.00	650.00	650.00	320.00
2G40-G34E	1350.00	650.00	650.00	295.00
2G40-G34EB	1350,00	650.00	650.00	305.00
2L4IC-GAE	1600.00	750.00	950.00	645.00
2L4IC-G34E	1600.00	750.00	950.00	575.00
2M41-GAE	1600.00	750.00	950.00	625.00
2M41-G14EB	1600.00	750.00	950.00	625.00
2M41-G34E	1600.00	750.00	950.00	565.00
2M4I-G34EB	1600.00	750.00	950.00	570.00
2M4IZ-Gl4E	1600.00	750.00	950.00	600.00
2M4IZ-G34E	1600.00	750.00	950.00	530.00
**3L4IC-Gl4E	1800.00	750.00	950.00	720.00
3L4IC-G34E	1800.00	750.00	950.00	660.00
**3M4I-G14E	1800.00	750.00	950.00	690.00
3M41-G34E	1800.00	750.00	950.00	640.00
3M41-G34EB	1800.00	750.00	950.00	690.00
3M4E-G14E	1800.00	750.00	950.00	675.00
3M4IZ-G34E	1800.00	750.00	950,00	610.00
4L4IC-G14E	2100.00	800.00	950.00	830.00
4L4IC-G34E	2100.00	800.00	950.00	800.00
4M41-G14E	2100.00	800.00	950.00	785.00
4M4I-G34E	2100.00	800.00	950.00	765.00
4M4I-G341EB	2100.00	800.00	950.00	785.00
4M4IZ-G14E	2100.00	800.00	950.00	785.00
4M4IZ-G34E	2100.00	800.00	950.00	730.00
Z790-G14E	1600.00	750.00	950.00	445.00
Z790-G14EB	1600.00	750.00	950.00	515.00
Z790-G34E	1600.00	750.00	950.00	435.00
Z790-G34EB	1600.00	750.00	950.00	500.00
Model	Length	Width	Height	Weight

NOTE: All dimensions shown are in mm and weights are in kg (dry weight).
    " Specifications, weights and dimensions are subject to change without prior n
    Certified specifications and drawings are available from HATZ AUSTRALIA Pty Ltd
        Optional Length of 1800 for Larger alternator
    ** Optional Length of 2100 for larger alternator